Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)

The Gravity 4Pin I2C/UART sensor cable is part of the standard Gravity series. It's 50cm long, with a PH2.0 - 4p connector on one side and an XH2.54 DuPont port on the other. It fits the standard breadboard pin pitch, making DIY connections a breeze. The cable uses a color - coded design. This helps you easily tell apart the positive and negative power supply, I2C SDA SCL, and UART RX TX. It's super easy to recognize and use. Specification: Maximum Voltage < 50V, Maximum Current < 1000mA, Length 50cm/20”. For the I2C Port, Red is VCC, Black is GND, Blue is SCL, and Green is SDA. For the UART Port, Red is VCC, Black is GND, Blue is TX, and Green is RX. Shipping List: 10 pieces of Gravity 4Pin I2C/UART Sensor Cable (50cm).

Using these cables is simple. First, identify the connector and port types. Connect the PH2.0 - 4p connector to your device and the XH2.54 DuPont port to the breadboard or other component. The color - coded design makes it easy to match the right pins. Just look at the color key for I2C and UART ports. When it comes to safety, don't exceed the maximum voltage of 50V and maximum current of 1000mA. If you do, it could damage the cable or your device. To maintain these cables, keep them away from sharp objects that could cut the insulation. Also, store them in a dry place to prevent corrosion. With proper use and care, these cables will serve you well for a long time.