FLiR Lepton Breakout Board V2

The FLIR Lepton® Thermal Camera Breakout Board is a user - friendly evaluation board. It allows you to rapidly connect the FLIR Lepton camera module to popular platforms such as Raspberry Pi or your own custom hardware. It's powered by an onboard power supply that can generate power from 3 to 5.5V, and it comes with a master clock. You can use a jumper to bypass the local power supplies, the master clock, and the power - up sequence components. This breakout board is compatible with all FLIR Lepton modules. Note that the FLIR Lepton Breakout Board V2 does not include a FLIR Lepton Module. You can get one now by following the link or clicking the product in the Hookup Accessories below. Key features include an operating temperature range of 0°C to 55°C, an input voltage of 3V to 5.5V, a space - saving design measuring 29.5 mm × 29.0 mm, and full compatibility with all FLIR Lepton modules. Available documents are the datasheet, schematic, and breakout drawing.

Using the FLIR Lepton Thermal Camera Breakout Board is quite easy. First, connect it to a common platform like Raspberry Pi or your custom hardware. Make sure the input voltage is between 3V and 5.5V. You can power it up, and if you want, use a jumper to bypass some components. This board works with all FLIR Lepton modules, but remember it doesn't come with a module. You need to get one separately. When using it, keep the operating temperature between 0°C and 55°C. For maintenance, just keep it in a clean and dry place. Check the datasheet, schematic, and breakout drawing for more detailed information if you run into any problems.