Grab a copy of Make: Bluetooth LE Projects for Arduino, RasPi, and Smartphones from the Adafruit shop. Then, kick - start your Bluetooth projects with this amazing pack of accessories. This pack is a steal as you save 20% by getting all the parts together! It's ideal for those up for a challenge and eager to explore the Bluetooth LE world. Note: this pack doesn't include the book. The pack features: Bluefruit LE - Bluetooth Low Energy (BLE 4.0) - nRF8001 Breakout, Adafruit BME280 I2C or SPI Temperature/Humidity/Pressure Sensor, 9V DC 1000mA Regulated Switching Power Supply, Half Size Breadboard, Rotary Encoder & Extras, Breadboard Friendly SPDT Slide Switch, NeoPixel Ring - 16 x 5050 RGB LED w/ Integrated Drivers, Lock - style Solenoid - 12VDC, Premium Male/Male Jumper Wires (20 x 3' and 20 x 6'), and a Make: Bluetooth Parts Pack component bag with 1x NPN Transistor PN2222, 5x 10K 5% 1/4W Resistors, 5x 220 ohm 5% 1/4W Resistors, 5x 12mm Tactile Switch, 5x Diffused 5mm Green LEDs, 5x Diffused 5mm Red LEDs. You can build almost all projects in the Make:Bluetooth book with this kit. Remember, you'll also need an Arduino UNO or a compatible device like an Adafruit Metro. And since some soldering and wiring are required, make sure you have a soldering iron, solder, and hand tools handy.
First, buy the Make: Bluetooth LE Projects book from the Adafruit shop. Then, gather all the parts from this pack. To start building projects, make sure you have an Arduino UNO or a compatible device like an Adafruit Metro. When you're ready, take your soldering iron and solder the components according to the project instructions in the book. Be careful while handling the soldering iron as it gets very hot. After finishing a project, you can use your Bluetooth - enabled device to connect and test it. Store the parts in a dry and cool place when not in use. If some parts get dirty, you can gently clean them with a dry cloth. Keep the small components like resistors and LEDs in the provided component bag to avoid losing them.
