Get this all - in - one kit! The M5Stack Basic Development Kit is an ESP32 - based WiFi microcontroller that works great with MicroPython and Arduino. It has powerful Wi - Fi and Bluetooth capabilities, runs at 240 MHz with a dual - core processor and comes with 4MB of SPI Flash. Ideal for those aiming to create advanced ESP32 projects with a display, user interface, speaker, and a few buttons. Adding sensors, interfaces, or cameras is a breeze by simply snapping in other M5 blocks, no soldering needed. You can upload your code via the built - in USB C port, and there's example code on the M5Stack website. The Black M5 Core features an ESP32 module with Wi - Fi/Bluetooth, 4MB of FLASH, a Micro - SD Card slot, a built - in USB to Serial converter, a 320x240 2.0' TFT display, 3 user buttons and 1 reset button, a small 1W speaker, a 150mAh LiPo battery, a Grove/I2C connector, and an M5 stacking GPIO connector. The kit includes a Black M5 Core, a bottom panel, 10 female/male jumper wires, and a USB Type C cable.
Using the M5Stack Basic Core IoT Development Kit is easy. First, connect the kit to your computer using the provided USB Type C cable. You can then upload your code through the built - in USB C port. There's example code on the M5Stack website to help you get started. To expand your project, simply snap in other M5 blocks to add sensors, interfaces, or cameras - no soldering required. When handling the Black M5 Core, be gentle with the buttons and the display. Avoid exposing the kit to extreme temperatures or moisture. For maintenance, keep the kit clean and dust - free. If you're using the Micro - SD Card slot, make sure to insert and remove the card carefully to prevent damage.
