The pyboard housing is a stunning and sturdy enclosure for all pyboard versions. Crafted from machined aluminum, it undergoes anodization to achieve a beautiful light - blue hue and is laser - engraved with labels. This open - lid design allows easy access to the female header pins on the pyboard's top, making it ideal for DIY projects! If your pyboard has female header pins soldered in, this housing is a great fit, keeping all the pyboard's functionality intact. You can plug in an SD - card and a micro - USB cable at the upper end of the housing. There are four small holes on the housing's top to show the pyboard's LEDs. The RST and USR switches are accessible through two tactile buttons that you insert into the lid before closing it with the four provided screws. Four rubber feet on the bottom ensure the housing sits securely on your desk. Features include machined aluminum with blue anodization, laser - engraved top labels, cut - outs for header pins, comfortable tactile buttons, holes to view LEDs, rubber feet for stability, and slots to access SD card, USB, and I/O connectors. It includes a top aluminum lid with header pin cut - outs, a bottom aluminum base, two tactile button extensions, four rubber feet, and four screws. Note: pyboard and header pins are not included but are available in the shop.
Using this pyboard housing is easy. First, if your pyboard has female header pins soldered in, place it inside the bottom aluminum base. Then, insert the two tactile button extensions into the lid. These buttons let you easily press the RST and USR switches on the pyboard. After that, put the lid on the base and use the four provided screws to close it up. You can then plug in an SD - card and a micro - USB cable at the upper end of the housing. Remember, the pyboard and header pins are not included in this package, but you can buy them in the shop. As for maintenance, simply use a soft, dry cloth to clean the aluminum surface. Avoid using abrasive materials that could scratch the anodized finish. When not in use, store the housing in a dry place to prevent any damage. Also, be careful when handling the tactile buttons to avoid breaking them. With proper use and care, this housing will keep your pyboard safe and accessible for a long time.
