Product Details
Discover these top - quality heavy - duty combination scissors boasting Kevlar cutting capability. They're perfect for workshops, DIY projects, handymen, or any situation where cutting tough materials is a must. With a 2 - IN - 1 non - slip blade and 3mm thick powerful shears made of SUS6A stainless steel, these scissors offer great performance. They have a hardness of HRC56 - 60, an overall length of 205mm, and weigh 125 g without the blade cap. The notched blade can cut various types of nylon/kevlar fiber, copper braided wire, leather or cork up to 5mm thick, aluminum plate up to 0.5mm thick, and PP/polycarbonate up to 1.2mm thick. The U - type blade can handle aluminum wire up to 2mm in diameter, rope up to 10mm in diameter, 5C coaxial cable, 2 mm2 PVC cabtire cord, and various types of cotton insulated cord. Remember, the cutting capacity is for reference only, and don't use the U - type blade to cut aluminum or metallic sheets to avoid blade damage.
Using these scissors is easy. First, choose the right blade for the material you're cutting. The notched blade is great for harder materials like nylon and leather, while the U - type blade works well for ropes and cables. Just place the material between the blades and squeeze the handles firmly. When it comes to maintenance, after each use, wipe the blades clean with a dry cloth to remove any debris. If they get dirty, you can use a mild soap and water solution, but make sure to dry them thoroughly to prevent rust. And always keep in mind the cutting capacity limits. Don't try to cut materials that are too thick or hard for the blades, especially avoid using the U - type blade on aluminum or metallic sheets as it can damage the blade. Also, the cutting capacity is just a guide, so test on a small piece first if you're unsure.
