Industrial pH Electrode - Armor Casing

This pH combination electrode features a sensitive low - impedance glass membrane. It offers fast response and excellent thermal stability for various pH measurements. With good reproducibility, it's resistant to hydrolysis and largely eliminates alkali error. In the 0 - 14 pH range, the electrode's output voltage is linear. The reference system with an Ag/AgCl gel electrolyte salt bridge provides a stable half - cell potential and great anti - pollution performance. The ring PTFE membrane is clog - resistant, making it ideal for long - term online detection. Note: This is just a probe and can be an upgrade part for Analog pH Meter (SEN0161). If you need a direct industrial long - term pH sensor, check Industrial pH Meter Kit Pro (SEN0169). The output voltage feedback ranges from 0 to 5V to represent pH values from 0 to 14. Applications include pH monitoring in printing, circuit board factories, and waste water with chromium, as well as industrial and domestic sewage. Specifications: Length (with protective cover) is 17.7cm (6.97'), diameter is 2.74cm (1.08'), wire length is 5m (196.85'), connector is BNC, measuring range is 0 - 14pH, measuring precision is ≤0.02pH, suitable temperature is 0 - 60°C, response time is 10sec, drift is ≤0.02PH/24hours, resistance of sensitive membrane is ≤200*106Ω, slope is ≥95%, and electrode's equipotential point is 7±0.5PH. Documents include a WiKi Doc. Shipping list contains an H - 101 pH electrode and a pH electrode manual.

Using this industrial pH electrode is straightforward. First, make sure the electrode is properly connected to your measuring device using the BNC connector. Then, immerse the electrode in the solution you want to measure. Wait about 10 seconds for a stable reading as that's the response time. The electrode works well in a temperature range of 0 to 60°C, so keep the environment within this limit. Note that this is just a probe and can be an upgrade for an Analog pH Meter (SEN0161). If you need a ready - to - use long - term pH sensor, consider the Industrial pH Meter Kit Pro (SEN0169). For maintenance, since the ring PTFE membrane is not easy to clog, you don't need to worry too much about blockages. But regularly check the wire for any signs of damage as it's 5m long. Also, store the electrode in a suitable solution when not in use to maintain its performance. The electrode has a measuring precision of ≤0.02pH and a drift of ≤0.02PH/24hours, so you can trust its accuracy over time.