Pi Zero ENC28j60 Network Adapter Module for Raspberry Pi Zero

The Pi Zero ENC28j60 is an amazing network adapter module designed specifically for Raspberry Pi Zero and Raspberry Pi Zero W. It enables these devices to connect to the network effortlessly, making system updates and software installations a breeze. This module ensures a smooth network experience, allowing you to enjoy seamless connectivity. **How to configure it**: 1. Install the NIC module into your Raspberry Pi. 2. Connect the network cable and make sure your router supports DHCP and is working properly. 3. Burn the Raspbian image to the TF card. 4. Use your preferred text editor like 'nano' or 'vim.tiny' to edit the /boot/config.txt file and add the parameter: dtoverlay=enc28j60. 5. Save the changes, exit the editor, and reboot your Raspberry Pi. **Note**: This module has only been tested in Raspbian environments. To check if the network adapter is working well, open a terminal and type the command: ifconfig. **Specifications**: - Compatibility: Works with Raspberry Pi Zero and Raspberry Pi Zero W. - Size: 6.5*3cm/2.5*1.1in - Weight: Approximately 19g. **Package Includes**: 1x Enc28j60 Network Adapter Module

Hey there! Using this ENC28j60 network adapter module is super easy. First, install the module into your Raspberry Pi Zero or Zero W. Then, connect a network cable to it. Make sure your router supports DHCP so that your device can get an IP address automatically. Next, burn the Raspbian image to the TF card. After that, use an editor like 'nano' or 'vim.tiny' to add the 'dtoverlay=enc28j60' parameter in the /boot/config.txt file. Save the changes and reboot your Raspberry Pi. Remember, this module has only been tested in Raspbian environments. If you want to check if it's working, just open a terminal and type 'ifconfig'. As for maintenance, keep it in a dry and clean place. Avoid exposing it to extreme temperatures or humidity. That's all you need to know to use this great network adapter module!