This amazing non-contact infrared thermometer allows you to effortlessly take fast and precise surface temperature readings without having to get uncomfortably close. The laser sighting feature guarantees that you're aiming at the right place. Just pull the trigger and align the laser dot where you want to measure the temperature. It also comes with adjustable emissivity compensation, which is great for measuring the surface temperature of objects with different levels of radiance. Key features include single-spot laser sighting, adjustable emissivity compensation from 0.1 to 1.00, high and low alarms for max temperature, a backlit display that's easy to read in low light, selectable temperature display in °C or °F, a low battery indicator, a 9V battery supply (included), a measuring temperature range from -32°C to 350°C, a resolution of 0.1°C/0.1°F, an accuracy of ±2.0°C or ±2%, a response time of 0.5 seconds, and a field of view of 12:1.
Using this thermometer is a piece of cake. First, make sure the 9V battery is properly installed. Then, point the thermometer at the object whose temperature you want to measure. Use the laser sighting to aim accurately. Pull the trigger, and in just 0.5 seconds, you'll get the temperature reading. You can switch between °C and °F on the display according to your preference. When measuring, keep in mind that the adjustable emissivity compensation can help you get more accurate results for different objects. If the temperature goes above or below the set limits, the high and low alarms will go off. In low - light conditions, the backlit display makes it easy to read the results. As for maintenance, when the low - battery indicator shows up, replace the 9V battery promptly. Also, keep the thermometer clean and store it in a dry place when not in use.
