802.3af PoE Output Data Power Splitter - 5/9/12V

Power over Ethernet (PoE) splitters simplify your project wiring. They connect any 802.3af-capable router to Ethernet devices, even those without native PoE support. This splitter takes a unified PoE signal (data and power) from one cable and separates the data (Ethernet) and power (+12VDC regulated) into two lines for non-PoE devices. It's an economical, practical, high-performance, and reliable multi-voltage (5V, 9V, or 12V) PoE output splitter based on the IEEE 802.3af standard. It can extract power and data signals from a network cable and work with any IEEE 802.3af-compatible PoE power supply equipment, supplying power and data to non-PoE network equipment. We also offer a version that provides 5V at a max of 2.4 Amp through a micro USB connector. Features include IEEE 802.3af compliance, support for 10/100M data transmission, a 44V - 57V power voltage input for easy use with DC48V power sources like those in generator rooms or various PoE devices, a 1 Amp regulated DC power supply via a DC barrel jack for small projects, a DIP switch for adjustable 5V, 9V, and 12V output power, and it comes with a variety of DC plugs with positive-tip output. Use it only with true 802.3af routers. If you don't have a PoE injector, hub, or router, check out our passive PoE cable kit.

Using this PoE splitter is easy. First, connect the splitter to an 802.3af-compliant router using a network cable. The splitter will then take the combined data and power signal from the cable. Next, connect the Ethernet output of the splitter to your non-PoE Ethernet device to send data. For power, you can choose the appropriate voltage (5V, 9V, or 12V) using the DIP switch and connect the device to the DC barrel jack or the micro USB connector if you're using the 5V 2.4 Amp version. Make sure to use only true 802.3af routers with this splitter. If you don't have a PoE injector, hub, or router, consider getting our passive PoE cable kit. When it comes to maintenance, keep the splitter in a dry and cool place. Avoid exposing it to extreme temperatures or moisture. If there are any issues, check the connections first and make sure the power source meets the 44V - 57V input requirement.