Ever wondered what a camping burner for ants would look like? Well, this isn't it! From the same makers of the high - end Motion Control Screwdriver, the sleek USB C Powered Pen - Style Soldering Iron, and the super - precise Mini Digital Tweezers, comes this amazing Mini Hot Plate Preheater with USB C Power Supply. It's the ideal tool for warming small PCBs during desoldering or rework, making you feel like an alchemist at work. Instead of a large hot air rework station, this little preheater is fast and portable. It heats up from room temperature to 300ºC in about 150 seconds. The mini - tower shaped controller has an OLED display and two A and B buttons on the back. There's also an LED that changes color as the temperature rises. It comes with smart features like preset temperature, tilt protection, power wake - up, and automatic sleep. The kit includes the MHP30 Controller and Hot Plate, a Silicone USB C Cable, a USB C High Current / Voltage Power Supply with US Plugs, an EU Plug Adapter, and Safety Instructions with firmware update info.
Using the Mini Hot Plate Preheater is a breeze. First, connect the hot plate to the MHP30 Controller using the Silicone USB C Cable. Then, plug the USB C Power Supply into a power source with the appropriate plug (either US or use the EU Plug Adapter). Turn on the device and use the A and B buttons on the back of the controller to set your desired temperature. You can even use the preset temperature feature for quick setup. As the temperature rises, the LED will change color to show you the status. When using, make sure to place the preheater on a flat and stable surface to avoid tilt - related issues. And don't forget about the automatic sleep feature, which helps save power when not in use. For maintenance, keep the preheater clean and free from dust. If you need to update the firmware, refer to the Safety Instructions included in the kit. That's all there is to it, enjoy using your new preheater!
