Micro Metal DC Geared Motor with Long Shaft (6V 98RPM M3*25)

This DC gearmotor features an integrated M3*25mm long rod as its output shaft, transforming it into a linear actuator. With a 6V rated voltage, it can reach a no - load speed of 98RPM. The brass faceplate comes with two M1.6 threaded mounting holes. You can also use the specially - designed mounting bracket or extended mounting bracket to securely mount the motor while protecting the exposed gears. Specification details include a 1:150 reduction ratio, specific current and speed values under no - load and load conditions, a load capacity of 550g*cm, a stall current limit, a locking torque of 1000g*cm, a single weight of about 10g, and mechanical noise of ≤50dB measured at about 10cm from the gearbox.

Using this micro metal DC geared motor is easy. First, decide how you want to mount it. You can use the holes on the brass faceplate with M1.6 screws, or opt for the mounting bracket or extended mounting bracket. Connect it to a 6V power source for standard operation. When using, keep in mind that the motor has different current and speed characteristics under no - load and load conditions. Don't exceed the load limit of 550g*cm to avoid stalling. For maintenance, keep it clean and free from dust. If you notice any unusual noise above 50dB, it might be a sign of a problem, so check it out right away. Store it in a dry place when not in use.