A torque limiter is a crucial protective device in a drive system. When shock loads, overloads, or machine jams cause the torque demand to exceed a preset value, it slips to limit the transmitted torque. Once the overload is removed, it automatically re - engages. The TL350 - 2 model features a spring - loaded friction surface. You can adjust the spring force using a nut or bolt to preset the sliding torque. It can be used as a center part with a sprocket, gear sheave, or flange plate, placed between the friction surfaces. Specification details: Type: TL350 - 2 (with special keyway and inner hole), Inner hole diameter: 22.23mm, Keyway width: 4.78mm, Torque range: 34 - 149N*m, Maximum speed: 5600, Weight: 2.48 kg, Material: The main body is made of 45 steel, and the friction plate is of non - asbestos material.
Using this torque limiter is easy. First, make sure the inner hole diameter (22.23mm) fits your drive system. You can use a nut or bolt to adjust the spring force and preset the sliding torque according to your needs. It can be installed as a center member with a sprocket, gear sheave, or flange plate between the friction surfaces. When using, be aware of the torque range (34 - 149N*m) and the maximum speed (5600). Don't let the torque demand exceed the preset value for a long time to avoid damage. For maintenance, regularly check the friction plate made of non - asbestos material. If it shows excessive wear, replace it. Also, keep the main body (made of 45 steel) clean and free from debris.
