JST to Breadboard Jumper (3-pin)

This is an easy - to - use jumper adapter cable. One end is pre - terminated with a female JST connector, and the other end has a breadboard hookup pigtail. It's a great solution for connecting components with a JST connector to a breadboard or the pins of an Arduino - based device. The wire length is 140mm (about 5.5 inches). The adapter's wires are color - coded as Red, Black, and Yellow, which makes it convenient to identify. The female JST connector has a basic 2mm pitch, and the male hookup pins can fit easily into a standard 0.1' connector. A datasheet is also available.

Using this jumper adapter cable is super easy. First, find the component with a JST connector. Plug the female JST connector on one end of the cable into it. Then, connect the breadboard hookup pigtail on the other end to your breadboard or Arduino - based device's pins. When handling the cable, be gentle to avoid bending the pins too much, as it might damage them. Also, make sure the pins are inserted fully to ensure a good connection. To keep this cable in good shape, store it in a dry place when not in use. If it gets dirty, you can use a dry cloth to wipe it clean.