Unlock the potential of your GPIB - enabled instruments with our cost - effective and user - friendly Prologix GPIB - ETHERNET controller. Connect it to any GPIB - enabled device and gain the ability to control it via an ethernet network from anywhere globally! Use this controller to remotely manage and download screen plots from various GPIB - enabled instruments such as Oscilloscopes, Logic Analyzers, Spectrum Analyzers, Function Generators, and Power Supplies over an ethernet connection. You can even use it with a wireless bridge for wireless access to your instruments. It comes with an external 8 - 15VDC power supply. Key features include no need for drivers, an included power supply, support for multiple instruments on the GPIB bus, a command interface similar to the well - known Prologix GPIB - USB controller, all - software configuration without switches, standard RJ - 45 and IEEE 488 (Male) connectors, and no requirement for a GPIB cable as it can directly attach to GPIB - enabled equipment. It has dimensions of 3.0'x2.5'x0.9' and comes with a datasheet and FAQ.
Using the Prologix GPIB - ETHERNET controller is a breeze. First, connect it directly to your GPIB - enabled equipment. You don't need a GPIB cable, which makes the setup simple. Then, connect it to an ethernet network. You can control your GPIB - enabled instruments like Oscilloscopes, Logic Analyzers, etc., from anywhere in the world. If you want wireless access, just use it with a wireless bridge. The controller comes with an 8 - 15VDC power supply, so make sure to plug it in. You don't have to install any drivers, and the configuration is all software - based, no need to fiddle with switches. When it comes to maintenance, keep it in a dry and clean place. Avoid exposing it to extreme temperatures. If you have any questions, refer to the included datasheet and FAQ.
