Hey! This isn't a tank tread. It's a 0.5 - meter long cable carrier. Made up of 10x15mm parts, it comes with two screw fasteners at each end for easy installation. Also known as a 'drag chain', it's great for projects with lots of moving parts. It protects your cables, pipes, or tubes, allowing them to bend and move safely. You'll often see these in 3D printers and CNC machines, but they work wherever you need cables or tubes to bend without getting damaged prematurely. This particular carrier has inner dimensions of 10mm in height and 15mm in width, an outer width of 22mm, and a bend radius of 20mm. It's thin enough to fit into an Actobotics channel, making custom projects a breeze. Just like a chain, you can add or remove individual links to get your desired length. Features include an inner bit height of 10mm, inner bit width of 15mm, outer bit height of 14mm, outer bit width of 22mm, a minimum bend radius of 20mm, and a reinforced nylon structure.
Using this cable carrier is easy. First, decide on the length you need. You can add or remove individual links just like you would with a chain. Then, use the screw fasteners at each end to mount it in your project. It works well in projects with moving parts like 3D printers and CNC machines, but can be used anywhere you need to protect cables. When installing, make sure the cables fit comfortably inside the carrier's 10x15mm inner dimensions. As for maintenance, it doesn't need much. Just check it regularly for any signs of wear and tear. If you notice a link is damaged, simply remove it and replace it with a new one. Keep it clean and dry to ensure its long - lasting performance and to protect your cables from damage.
