Netduino is an amazing open - source electronics platform powered by the .NET Micro Framework. It comes with a 32 - bit microcontroller and a top - notch development environment, making it a great choice for both engineers and hobbyists. The Netduino 3 is even better as it already has built - in Wi - Fi, supporting SSL/TLS 1.2 and WPA2. It has the same 168 MHz (Cortex - M4) processor as the Netduino Plus 2. However, it offers almost four times the code storage at 1408 KB and nearly double the RAM at 164+ KB. Check out the full specs and more info at netduino.com. Key features: Works with most Arduino shields (some need .net mf drivers), 6 adc channels (12 - bit), micro sd storage (up to 2gb), and 3 gobus ports. What's in the bag: Netduino 3 wi - fi, four rubber bumpers, and a 5 cm gobus cable.
Using the Netduino 3 WiFi is easy. First, connect it to your computer through the appropriate cable. You can then start developing your projects with the help of the rich development environment provided. When using Arduino shields, note that some might need .net mf drivers. For the Wi - Fi, it's pre - configured to support SSL/TLS 1.2 and WPA2, so you can quickly get online. When it comes to storage, you can use a micro SD card up to 2GB. As for maintenance, keep it in a dry and clean place. Avoid exposing it to extreme temperatures or physical shocks. If you want to expand its functionality, use the 3 gobus ports and 6 adc channels as needed. Also, make sure the rubber bumpers are in place to protect the device from minor impacts.
