Enhance your outdoor displays with this pre - assembled NeoPixel LED netting. It features a 20x20 RGB LED layout, giving you 400 addressable pixels that are all controlled by a single data pin. No need to piece together multiple strips; creating large LED grids is a breeze! Key features include 20 x 20 NeoPixel LEDs with a 50mm (2') spacing in a zig - zag wiring pattern. It's simply controlled, compatible with SK6812/WS2812/NeoPixel signals at 5V logic. With a 12V power input, it maintains consistent brightness across the grid. Each LED draws 30mA, up to 12A at full brightness, and a 12V 5A power supply is enough for most displays. Works great with ESP32 & WLED, especially recommended for the Sparkle Motion board or any 400 - LED capable controller. It's outdoor - friendly but not waterproof, so avoid submersion and long - term direct sunlight. Installation is easy thanks to plastic rings on top/bottom and coated wire loops on the sides. Ideal for holiday displays, event decorations, or interactive installations, expanding to larger grids has never been simpler.
Using this NeoPixel LED netting is straightforward. First, find a suitable outdoor location for your display. Avoid areas where it might get submerged in water or be exposed to long - term direct sunlight. Connect the netting to a 12V power supply. A 12V 5A power supply is sufficient for most displays, but keep in mind that at full brightness, it can draw up to 12A. Connect the single data pin to a compatible controller like ESP32 or WLED, and the Sparkle Motion board is a great option. You can easily mount it using the plastic rings on the top and bottom and the coated wire loops on the sides. When it comes to maintenance, make sure to check the connections regularly to ensure everything is secure. If you notice any dimming, it might be a sign that the power supply needs to be adjusted. And don't forget to refer to our NeoPixel Uber guide for more in - depth care tips.
