The ME007YS Waterproof Ultrasonic Sensor is a top - notch device for measuring distances. It determines the distance to a target by measuring the time between sending and receiving an ultrasonic pulse. This sensor offers high accuracy, stable data output, and can penetrate through smog and dust. It features a closed probe for the transmitter and receiver, making it waterproof and dustproof. All signal - processing units are integrated within the module. You can directly get the distance value via the Asynchronous Serial Interface. With a 9600bit/s band rate, it easily communicates with upper - hosts or other MCUs, significantly reducing your development time. You can use it with an Arduino controller for various projects like backing car annunciators, obstacle - avoidance robots, and object - approaching detectors. Here are its specifications: Operating Voltage is 5V, Average Current is less than 8mA, Peak Current is no more than 50mA, Blind Zone Distance is 28cm, Detection Range for flat objects is 28 - 450cm, Output is UART, Duty Circle is 100ms, Probe Center Frequency is 40K±1.0KHZ, Operating Temperature ranges from - 15 to 60℃, Storage Temperature is from - 25 to 80℃, Operating Humidity is no more than 80%, Storage Humidity is no more than 90%, and it has an IP67 waterproof grade. Also, you can refer to the product wiki for more information.
Using the ME007YS Waterproof Ultrasonic Sensor is easy. First, make sure it's connected properly. You can connect it to an Arduino or Raspberry Pi. When connecting to an Arduino, the sensor's integrated design means you can directly get distance values through the Asynchronous Serial Interface. For projects, just pair it with an Arduino controller and start building things like backing car annunciators or obstacle - avoidance robots. When using, keep it within the specified temperature and humidity ranges. The operating temperature should be between - 15℃ and 60℃, and the operating humidity should be 80% or less. Don't expose it to extreme conditions. For storage, keep it in a place with a temperature between - 25℃ and 80℃ and humidity of 90% or less. To maintain it, since it's waterproof and dustproof, you don't need to worry too much about minor environmental factors. But still, avoid physical damage to the sensor. Check the connections regularly to ensure stable performance. If you need more detailed information, refer to the product wiki.
