This amazing JST connector kit comes with PHR-2, PHR-3, and PHR-4 housings (20 units each), through-hole type shrouded headers (20 units each), and 100 crimp contacts. Key specifications include a 2.0mm pitch (0.079'), a current rating of 2A AC/DC (AWG #24), and a voltage rating of 100V AC/DC. It operates in a temperature range from -25°C to +85°C. The contact resistance has an initial value of 10m Ω max and 20m Ω max after environmental testing. The insulation resistance is 1000M Ω min, and it can withstand 800V AC for a minute. Applicable wires are AWG#32~#24, and the suitable PC board thickness is 0.8mm~1.6mm (0.03~0.06'). The shipping list includes 20 units of each housing, 60 through-hole type shrouded headers in total, 100 crimp contacts, and one two-sided compartment parts box.
Using this JST connector kit is easy. First, select the appropriate housing according to your needs, like the PHR-2, PHR-3, or PHR-4. Then, connect the through-hole type shrouded headers to your PC board, making sure the board thickness is between 0.8mm and 1.6mm. Next, attach the crimp contacts to the applicable wires (AWG#32 - #24). When using, keep in mind the current and voltage ratings. The current rating is 2A AC/DC and the voltage rating is 100V AC/DC, so don't exceed these limits. Also, the temperature range is -25°C to +85°C, so avoid using it in extremely hot or cold environments. For maintenance, store the kit in a dry place and keep the parts in the two-sided compartment parts box when not in use. Check the contact resistance regularly to ensure good performance.
