ID01 UHF RFID Reader-USB

The ID01 UHF RFID Reader - USB is a top - notch remote read - write module for IC cards. It uses advanced non - contact UHF technology. This reader has a wide range of uses, including vehicle monitoring, remote control, home alarm systems, wireless meter reading, access control, industrial data acquisition, and more. Specifications: It features a USB interface, with a maximum working current of 200mA and a max output power of 24dBm. The effective range is up to 50cm (30cm for close - range RFID tags, affected by antenna and environment). It has a sensitivity of - 102dBm (at least - 98dBm), supports multiple baud rates (9600, 19200, 38400, 57600, 115200 bps) and the ISO18000 - 6C (EPC G2) protocol. Response time is fast: less than 10ms per 8 bytes for reading and less than 20ms per byte for writing. It can work in an environment temperature of - 20°C to + 65°C and has a size of 155mm*100mm (6.10'*3.94'). Documents like Wiki Doc and User Manual are available. Shipping includes 1 UHF RFID MODULE - UART, 3 RFID cards, and 3 RFID stickers.

Using the ID01 UHF RFID Reader - USB is quite easy. First, connect it to your device via the USB interface. Make sure the device is powered on and ready to work. When using it, keep the RFID tags within the effective range, which is up to 50cm. For best results, try to minimize interference from the environment. When it comes to the baud rate, you can choose according to your needs from the supported ones: 9600, 19200, 38400, 57600, or 115200 bps. As for maintenance, keep the reader in a clean and dry place. Avoid exposing it to extreme temperatures outside the - 20°C to + 65°C range. If you have any questions, refer to the Wiki Doc or User Manual that comes with the product.