HighPi Pro 5S Case for Raspberry Pi 5

The HighPi Pro 5S Case for Raspberry Pi 5 is a top - notch addition to the HighPi case series. It combines user - friendly operation, flexible configuration, and an eye - catching design. This case fully supports the upgrades on the Pi 5 board, including the active cooler, power button, and PCIe port. There's ample space inside for various HATs, like power over ethernet, NVMe storage, or UPS backup boards. Crafted from ABS plastic, it's one of the easiest cases in the market to assemble and disassemble. You don't need any tools, and all components stay firmly in place. The package comes with four rubber feet for better stability. Note that the Raspberry Pi, Active Cooler, and Camera Module are not included. Key features are as follows: it's only compatible with Raspberry Pi 5, has optimized vents for active coolers, allows visibility of the power button and external status LED, and has a camera cable slot above the ethernet for external camera connections. The secure microSD card cover can be removed from inside the case and stored under the lid when not in use. It offers industry - leading ease of use, rapid tool - free assembly and disassembly, a large internal volume for HATs and other components, VESA or wall - mounting options via an optional VESA mount kit (coming soon), a GPIO ribbon cable port, and four self - adhesive rubber feet. Specifications include being made of ABS Plastic, with external dimensions of 101 x 67 x 42mm and an internal volume for breakout boards of 85 x 56 x 30.5mm. It also comes with a dimensional drawing, Lustran 433 Material Sheet, and Lustran 433 Certification Sheet. The case can hold the Active Cooler, Raspberry Pi 5, and additional items such as PoE HATs, NVMe HATs, UPS HATs, and any HAT up to 14.5mm tall on top of the Active Cooler with 16mm standoffs. If not using the Active Cooler, it can accommodate oversized heatsinks or cooling solutions and any HAT up to 30.5mm above the Pi PCB without input/output ports. Assembly is a breeze: install the Active Cooler and other add - on boards on the Raspberry Pi, slide the board into the front of the case, press it down to snap it in, and then insert and snap the lid. To remove, gently push under the hexagon vents to take off the lid and pull the snap to remove the board. The package includes 1x HighPi Pro 5S Case and 4x Rubber feet.

Using the HighPi Pro 5S Case for your Raspberry Pi 5 is quite straightforward. First, gather all the parts you want to install, like the Active Cooler and other add - on boards. Then, install them on the Raspberry Pi. Next, slide the Raspberry Pi board into the front of the case, making sure the USB - C and micro - HDMI ports fit into their proper positions. Press down on the back of the board to snap it securely into the case. Finally, insert the right edge of the lid into the case and snap down the left side. When you need to remove the lid, just gently push on the bump under the hexagon vents and then push upward. To take out the Raspberry Pi board, pull the snap that secures it outward with your finger. Remember, the Raspberry Pi, Active Cooler, and Camera Module are not included in the package. For maintenance, keep the case clean by using a soft, dry cloth to wipe it. Avoid using harsh chemicals as they may damage the ABS plastic material. Also, if you're not using the microSD card cover, store it under the lid as it's attached to the inside of the lid. When considering adding HATs, make sure to check the height limits. If you use the Active Cooler, HATs can be up to 14.5mm tall on top of it with 16mm standoffs. Without the Active Cooler, HATs can be up to 30.5mm above the Pi PCB as long as they don't require input/output ports.