This is an amazing heated bed upgrade kit designed specifically for the OverLord 3D printer. It can transform the Overlord's acrylic bed into a heatable one. By using this upgrade kit, you'll significantly reduce model shrinkage and deformation. You can even use ABS as the printing material with the heated buildplate. The kit consists of four key parts: an aluminum buildplate, a heater, a special power adapter, and a temperature sensor. The aluminum buildplate has excellent thermal conductivity. The special power adapter, similar to the Pro version, provides sufficient power for the heating system. If the Overlord 3D printer no longer meets your needs, give this upgrade kit a try and you'll be pleasantly surprised! (This kit is only for the Overlord.) Specification: Buildplate - Material: Aluminum, Thickness: 5.5mm, Weight: 790g; Buildplate Heater - Voltage: 24V, Power: 160W; Buildplate Thermistor - Temp. range: - 40°C~250°C, Resistance at 25°C: 100kΩ; Power adapter - Input: 100 - 240VAC,50/60Hz,4.0A, Output: 24V/9.2A. Documents include Kit Firmware and Firmware Upgrade. Shipping list: 1 Aluminum buildplate, 1 Buildplate Heater, 1 Buildplate Thermistor, 1 OverLord Pro Power adapter.
Using the heated bed upgrade kit for your OverLord 3D printer is easy. First, carefully remove the existing acrylic bed. Then, install the aluminum buildplate from the kit in its place. Connect the heater, temperature sensor, and power adapter as per the provided instructions. When using ABS as the printing material, make sure the heated buildplate is at the right temperature. This will help reduce shrinkage and deformation of your printed models. As for maintenance, keep the buildplate clean. Wipe it gently with a soft cloth after each use. Avoid using abrasive materials that could scratch the surface. Also, check the connections of the heater, sensor, and power adapter regularly to ensure they are secure. If you encounter any issues, refer to the kit firmware and consider a firmware upgrade if necessary.
