Gravity: Liquid Flow Sensor (G1/4)

The Gravity liquid flow sensor is a well - crafted device based on electromagnetic principles. It features an O - ring rubber seal and uses silicone sealant at the outlet for excellent water - resistance. With high anti - interference and anti - impact capabilities, it offers reliable performance and a long service life. The G1/4 thread connectors make installation a breeze. This sensor can work with microcontrollers like Arduino UNO to measure the flow of high - concentration, low - viscosity liquids such as water, diesel, engine oil, milk, paint, detergent, and honey (liquids should be impurity - free). It has a Gravity connector for easy wiring, operates on a wide voltage range of 3.5 - 24V, supports measuring specific liquids, and is RoHS compliant. Ideal for measuring the flow of appropriate liquids.

Using the Gravity liquid flow sensor is quite simple. First, connect it to a microcontroller like Arduino UNO through the Gravity connector. Make sure to connect the power supply within the 3.5 - 24V range. Then, connect the sensor to the pipeline with the G1/4 thread connectors. When measuring, ensure the liquid is high - concentration, low - viscosity, and free of impurities. As for precautions, don't exceed the water pressure limit of 1.0MPA. Also, keep the operating temperature between - 10°C and 70°C and humidity between 35% and 90%RH without condensation. For maintenance, check the O - ring rubber seal regularly for wear. If there is any damage, replace it promptly. Store the sensor in a place with a temperature between - 25°C and 80°C and humidity between 25% and 95%RH.