Product Details
The Fermion 1.8-inch TFT display, powered by the ST7735S driver chip, offers a sharp 128×160 resolution and uses SPI (4-wire) communication. It comes with an integrated SD card slot, enabling you to easily access full-color bitmaps from the SD card. This module provides two wiring options: pin header wiring and GDI (General Display interface). You can simply connect it to a FireBeetle main controller using an FPC cable for a plug-and-play setup. With a low refresh rate, it delivers a great display effect and high versatility. It's ideal for various applications such as sensor monitoring and alarm systems, Arduino temperature monitors, and fan controllers. Features include 128x160 resolution, SPI (4-wire) communication, and an SD card slot. Specifications cover an operating voltage of 3.3 V - 5 V, a 120-degree TFT viewing angle, and more. You'll also get access to product documentation like the product wiki, schematics, and chip datasheet. The shipping list includes one display, one GDI display cable, and one 10P pin connector.
Using this Fermion display is easy. First, choose your preferred wiring method, either pin header wiring or GDI. If you're using a FireBeetle main controller, connect the display with an FPC cable for a quick setup. Once connected, you can start using it right away. To use the SD card slot, simply insert an SD card with full - color bitmaps. When it comes to applications, you can set it up for sensor monitoring, temperature checking, or fan control. For maintenance, keep the display in an environment with an operating temperature between -10°C and +60°C. Avoid exposing it to extreme heat or cold. Also, clean the display gently with a soft, dry cloth. If you have any issues, refer to the product wiki, schematics, or chip datasheet provided. And remember, the operating voltage should be between 3.3 V and 5 V, so use a suitable power source.
