Computer Starter Kit for Raspberry Pi 3 (Includes Raspberry Pi!)

Are you eager to build your own computer but don't know where to start? Our amazing Computer Starter Kit for Raspberry Pi 3 is exactly what you need! This kit comes with everything you require to kick - start your computer - building journey. It includes a keyboard, a mouse, a power supply, a Pi enclosure, an HDMI cable, and an SD card pre - loaded with the essential operating system. All you have to do is plug in an HDMI monitor or TV, and you're ready to go! Here's what's inside the kit: 1 x 1 - meter HDMI Cable, 1 x 8GB MicroSD Card with full PIXEL desktop NOOBS - v2.4, 1 x 15 x 15 x 15mm Aluminum Heat Sink for Raspberry Pi 3, 1 x Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case with a Smoke Base and Clear Top, 1 x USB Wired Mouse, 1 x 5V 2.5A Switching Power Supply with a 20AWG 6' MicroUSB Cable, 1 x Black USB Wired Mini Chiclet Keyboard, and 1 x Raspberry Pi 3 - Model B with 1G RAM ARMv8. Get started on creating your own computer today!

Using this Raspberry Pi 3 starter kit is super easy. First, take out the Raspberry Pi 3 from the kit. Place it in the Adafruit case. Make sure to attach the aluminum heat sink to keep it cool. Then, insert the 8GB MicroSD card with the operating system into the Pi. Connect the HDMI cable from the Pi to your monitor or TV. Plug in the power supply using the MicroUSB cable. Now, connect the USB wired mouse and keyboard to the Pi. Once everything is connected, turn on the power, and you're ready to start using your new computer. As for maintenance, keep the kit in a dry and clean place. Make sure the heat sink is clean to prevent overheating. Avoid dropping or hitting the components. If you're not using the kit for a long time, store it properly. And always follow the safety instructions when using electrical components.