7 inch LCD HDMI Touch Screen Display TFT

This is the Little Bird Electronics 7-inch LCD HDMI touch screen designed for Raspberry Pi. It boasts an 800 x 480 HD resolution and capacitive touch control, offering a sharp and responsive display. This screen supports Raspberry Pi, Banana Pi, and Pro Banana hardware. With our easy-to-follow guide, you can quickly configure it to work with Raspbian. It's not just for Raspberry Pi; it also serves as a general HDMI display and can be used as a computer monitor. The HDMI interface connects the screen to your device, while a USB connector powers the screen and enables touch functionality. Inside the box, you'll find a full-size HDMI cable, a USB A to micro B cable, and mounting hardware. Note: Don't use the supplied CD ROM. Follow the tutorial steps at the bottom of this page. Also, the touch screen brightness can only be turned on or off via the switch at the bottom of the screen; it's not adjustable. Check out our setup guide at https://www.littlebird.com.au/learn/97/7-inch-lcd-touch-screen-with-raspberry-pi to get started easily.

Using this 7-inch touch screen is a breeze. First, connect the HDMI cable from the screen to your device, like a Raspberry Pi. Then, use the USB A to micro B cable to power the screen and enable touch. Follow the guide at https://www.littlebird.com.au/learn/97/7-inch-lcd-touch-screen-with-raspberry-pi to configure it for your specific device. Remember, don't use the CD ROM and follow the online tutorial. The brightness of the touch screen can be turned on or off using the switch at the bottom, but it can't be adjusted. For maintenance, keep the screen clean with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could scratch the screen. If you have any issues, reach out to our support team for help.