2.4GHz Antenna - Adhesive (U.FL Connector)

This adhesive, omni - directional antenna is an ideal solution when you need to get a signal from a transmitter placed in an enclosure. It operates on the 2.4GHz band and works perfectly for WiFi, Bluetooth, or ZigBee. Just use the attached u.fl connector to connect the antenna, then peel and stick it easily. It has dimensions of 41 x 30mm and comes with a 350mm cable. Features include an omni - directional type, dual frequency ranges of 2300 to 3800MHz and 5150 to 5875MHz, an impedance of 50 Ohm, a maximum VSWR of 3, and a typical gain of 2(Max) dB. There are also datasheet and mechanical drawing available for reference.

Using this antenna is super easy. First, connect the antenna to your device with the u.fl connector that comes with it. Then, peel the adhesive backing and stick the antenna where you need it to get a good signal. This antenna is great for WiFi, Bluetooth, or ZigBee devices operating on the 2.4GHz band. When handling it, be careful not to bend the cable too much as it might affect the signal. Keep it away from extreme heat or moisture to maintain its performance. You can clean it gently with a dry cloth if it gets dirty. And don't forget to check the datasheet and mechanical drawing for more detailed information.