2.23inch OLED Display Module for Raspberry Pi Pico, 128×32, SPI/I2C

This 2.23-inch OLED display module is designed specifically for Raspberry Pi Pico. It's embedded with an SSD1305 driver and uses the SPI/I2C bus for communication. With a resolution of 128×32 and a black/white display color, it offers clear visuals. It features both 4-wire SPI and I2C interfaces, providing better compatibility and a fast data rate. The module comes with a standard Raspberry Pi Pico header, supporting Raspberry Pi Pico series boards. It also includes development resources and a manual with Raspberry Pi Pico C/C++ and MicroPython examples. Specifications include a logical voltage of 3.3V, an operating voltage of 3.3V/5V, a viewing angle of >160°, and dimensions of 63.00 × 26.00mm. It has an onboard female pin header for direct attachment to Raspberry Pi Pico, but the Raspberry Pi Pico is not included. Check the WIKI: Pico - OLED - 2.23 for more resources.

Using this OLED display module with your Raspberry Pi Pico is easy. First, attach the module to your Raspberry Pi Pico using the onboard female pin header. Then, you can use the provided Raspberry Pi Pico C/C++ and MicroPython examples to start your project. Remember, the Raspberry Pi Pico is not included, so you'll need to have one on hand. When handling the module, avoid touching the display panel directly to prevent scratches. For maintenance, keep it in a dry and clean environment. If you need more resources or information, check the WIKI page: Pico - OLED - 2.23. Note that resources for different products may vary, so always confirm the actually provided resources on the wiki page.