1.5inch OLED Display Module, 128×128 Resolution, SPI / I2C Communication, Black / White Display Color

This 1.5-inch OLED display module offers a 128×128 resolution and supports both SPI and I2C communication. It features a black and white display color. The module is embedded with an SH1107 driver chip and comes with examples for popular platforms like Raspberry Pi, Arduino, and STM32. With an ultra-narrow bezel and a compact size, it has an onboard voltage translator. It adopts 4-wire SPI and I2C interfaces for better compatibility and a fast data rate. Online development resources are also provided. The display panel is OLED, with a GH1.25 7Pin connector. Specifications include details about the control interface and hardware connection. For example, it can be connected to a Raspberry Pi or an Arduino board via the SPI interface. Note that the 0.96-inch OLED has a special color layout. The package includes one 1.5-inch OLED Module (B) and one GH1.25 7PIN cable.

Using this 1.5-inch OLED display module is quite easy. First, connect it to your device, like a Raspberry Pi or Arduino board, via the SPI interface. You can refer to the provided examples for different platforms to start programming. When using it, make sure the power supply is stable. Don't expose it to extreme temperatures or humidity. For maintenance, keep it clean. You can use a soft, dry cloth to wipe the display gently. If you have any questions, check out the wiki at www.waveshare.com/wiki/1.5inch_OLED_Module_(B). Remember, the STM32 board shown in the usage example is not included in the package.